This tutorial will guide you through creating your first size recommendation quiz from start to finish. We’ll build a complete quiz for a women’s t-shirt collection as an example.

Before You Start

Make sure you have:

  • ✅ Access to your product size chart
  • ✅ A clear understanding of your target customers
  • ✅ Products with size variants set up in Shopify
  • ✅ About 15-30 minutes to complete the tutorial

Step 1: Access the Quiz Dashboard

  1. Open SmartSize AI Fit Recommender from your Shopify admin apps section
  2. Navigate to the main dashboard - You’ll see the “Fit Quizzes” page
  3. Click the “New Quiz” button in the top-right corner

This will take you to the quiz editor with a blank quiz ready to configure.

Step 2: Configure Basic Quiz Information

The first section you’ll see is the Quiz Information card at the top.

Set the Quiz Title

  1. Click in the “Title” field
  2. Enter a descriptive name for your quiz
    • Example: “Women’s T-Shirt Size Guide”
    • Tip: Use names that clearly identify the product and audience

Set the Quiz Status

  1. Leave status as “Draft” for now
  2. You’ll change this to “Active” once everything is configured
  3. Draft quizzes are not visible to customers

Result: Your quiz now has a name and is in draft mode for testing.

Step 3: Select Target Gender

The next section is Gender Selection.

Choose the Appropriate Gender

  1. Select “Female” for our women’s t-shirt example
  2. Options available:
    • Male - For men’s products
    • Female - For women’s products
    • Unisex - For gender-neutral products

Why this matters: Gender selection affects the measurement labels and customer experience.

Step 4: Configure Garment Category

In the Garment Category section, you’ll define what type of clothing this quiz covers.

Select “Top” Category

  1. Choose “Top” from the options
  2. Available categories:
    • Top - Upper body garments (shirts, jackets, sweaters)
    • Bottom - Lower body garments (pants, skirts, shorts)
    • Both - Full body or sets (dresses, jumpsuits)
    • Custom - Advanced custom configurations

Automatic Measurement Configuration

When you select “Top”, SmartSize AI Fit Recommender automatically:

  • ✅ Enables chest measurements (primary for tops)
  • ✅ Enables waist measurements (important for fit)
  • ❌ Disables hip measurements (not needed for tops)

Result: Your quiz is now configured to collect the right measurements for t-shirts.

Step 5: Create Your Size Table

This is the most important part - defining your size chart with measurements.

Understanding the Size Table

The size table shows:

  • Size Name - Your size labels (XS, S, M, L, XL)
  • Chest Min/Max - Minimum and maximum chest measurements for each size
  • Waist Min/Max - Minimum and maximum waist measurements for each size

Add Your First Size

  1. Click “Add Size” button
  2. Enter size name: “XS”
  3. Enter chest measurements:
    • Min: 81 cm
    • Max: 86 cm
  4. Enter waist measurements:
    • Min: 61 cm
    • Max: 66 cm

Add Remaining Sizes

Continue adding sizes with your size chart data:

Size Chest Min Chest Max Waist Min Waist Max
XS 81 86 61 66
S 86 91 66 71
M 91 96 71 76
L 96 102 76 82
XL 102 108 82 88

Size Table Tips

  • No gaps: Ensure measurements flow smoothly between sizes
  • Logical progression: Each size should be larger than the previous
  • Realistic ranges: Base measurements on actual product measurements

Confirm Size Order

  1. Check the “Size order confirmation” checkbox
  2. This confirms your sizes are arranged from smallest to largest
  3. Required before saving the quiz

Result: You now have a complete size table that customers’ measurements will be matched against.

Step 6: Choose Measurement Units

In the Measurement Units section:

Select Your Preferred Units

  1. Choose “Metric” if you entered measurements in centimeters
  2. Choose “Imperial” if you prefer inches
  3. For our example, we used centimeters, so select “Metric”

Note: You can change units later, and SmartSize AI Fit Recommender will handle conversions automatically.

Now you need to tell SmartSize AI Fit Recommender which products this quiz applies to.

Set Linking Condition

  1. Choose “Meet at least one condition” (ANY)
  2. This means products only need to match one of your linking criteria
  3. Alternative: “Meet all conditions” (ALL) requires products to match every criteria

Set Priority

  1. Leave priority as “0” for your first quiz
  2. Higher numbers take precedence if multiple quizzes match the same product
  1. Click “Select collections”
  2. Choose your women’s t-shirt collection from the Shopify picker
  3. Confirm your selection

Alternative Linking Methods

You can also link by:

  • Specific products - Individual product selection
  • Product types - All products of a certain type
  • Vendors - All products from specific brands
  • Tags - Products with specific tags

Result: Your quiz will now appear on all products in your selected collection.

Step 8: Save Your Quiz

Save as Draft

  1. Click “Save” in the top save bar
  2. SmartSize AI Fit Recommender will validate your quiz
  3. Address any validation errors if they appear
  4. Your quiz is now saved as a draft

Common Validation Errors

  • “Title is required” - Add a quiz title
  • “At least one size is required” - Add sizes to your size table
  • “Size order must be confirmed” - Check the size order confirmation
  • “At least one measurement must be enabled” - Ensure chest, waist, or hip is enabled

Step 9: Test Your Quiz

Test in Draft Mode

  1. Visit one of your linked products in your store
  2. Look for the size recommendation section (visible to admins only in draft mode)
  3. Test with different measurements to verify recommendations work correctly

Example Test Measurements

Try these measurements to test your t-shirt quiz:

  • Customer 1: Chest: 88cm, Waist: 68cm → Should recommend Size S
  • Customer 2: Chest: 94cm, Waist: 73cm → Should recommend Size M
  • Customer 3: Chest: 99cm, Waist: 79cm → Should recommend Size L

Step 10: Activate Your Quiz

Once you’re satisfied with testing:

Go Live

  1. Return to the quiz editor
  2. Change status from “Draft” to “Active”
  3. Click “Save”
  4. Your quiz is now live for customers to use

Verify Activation

  1. Visit your store as a customer (incognito/private browser)
  2. Check that the quiz appears on your linked products
  3. Test the complete customer experience

Congratulations!

You’ve successfully created your first size recommendation quiz! Your customers can now:

  • ✅ Enter their measurements on product pages
  • ✅ Receive personalized size recommendations
  • ✅ Make confident purchasing decisions
  • ✅ Reduce sizing-related returns

Next Steps

Now that you have a basic quiz working:

  1. Monitor performance - Track how customers use the quiz
  2. Gather feedback - Ask customers about their experience
  3. Create additional quizzes - For other product categories
  4. Explore advanced features - Custom categories, strictness settings
  5. Optimize recommendations - Refine size charts based on customer feedback

Quick Reference: Complete Quiz Checklist

Before activating any quiz, ensure:

  • Descriptive title set
  • Correct gender selected
  • Appropriate garment category chosen
  • Complete size table with all sizes
  • Accurate measurements for each size
  • Size order confirmed from smallest to largest
  • Products linked via collections, types, or direct selection
  • Quiz tested with sample measurements
  • Status changed to Active

Your first quiz is complete and helping customers find their perfect fit!